|
Electronic Catalogue - UGFM 2000 series Ultrasonic Gas Meters (PDF)
MaxMet Products Enquiry Form
Specifications
- Measurement Principle : Transit-time ultrasonic pulse measurement
- Available Meter Size : Internal Diameter from 100 to 500 mm.
| Size DN | 100 | 150 | 200 | 250 | 300 | 400 | 500 |
| ID(mm) | 100 | 150 | 200 | 250 | 300 | 400 | 500 |
| ID(inch) | 4 | 6 | 8 | 10 | 12 | 16 | 20 |
- Flow Rate Range (at 10 bar of process pressure, 145.04 PSI, 1 MPa)
ANSI/ASME 36.19M ANSI/ASME 16.5 Class 150
| DN | 100 | 150 | 200 | 250 | 300 | 400 | 500 |
| Max.(knm3/h) | 9.4 | 21.1 | 32.2 | 50.3 | 72.5 | 107.4 | 167.8 |
| Min.(knm3/h) | 0.13 | 0.3 | 0.54 | 0.84 | 1.21 | 2.15 | 3.36 |
- Operating temperature
-20 oC - 65 oC (5 oF - 150 oF)
- Pressure Range : At present only ANSI Class 150 & 300 are available.
For further inquiry for higher pressure meter up to ANSI/ASME class 2500, please contact MaxMet technical contact point
(gasmeter@maxmet.com )
- Repeatability: less than± 0.2 % of reading (95% confidence limit)
- Recommended minimum flow velocity : over 0.5 cm/s
- Safety : IP67 & NEMA class
- Interface : RS232/485, PSI, frequency (0-1 kHz), 4/20 mA , HART® and others upon order
- Electric power : AC 100-250 Autorange (45-65 Hz) , DC 12 -24 V
- Option
. -T: temperature module (-30oC - 100oC )
. -P: pressure module (0- 100 bar)
. -SS: with MaxMet TCP/IP network tele-measurement module with SW
- Nota: Models for domestic gas meters are also available upon the order of the customers
|
|
Dear Customer,
Weclome to MaxMet's USFM-2000 seriesUltrasonic Gas Meters page. We appreciate for your interest in our precision process flow measurement devices.
In both the area of custody transfer purpose and process control, MaxMet Inc is operating and pursuing the leading-edge technology business in the world.
Our gloval customers can rely on our international standard class measurement technology which will improve your operation performance, save times and cost.
FEATURES
Five precision multi-beam time of flight measurement
MaxMet’s ultrasonic gas meters provide the precision measurement of gas flow mean velocity then other single path gas meters. Best reliability
for custody transfer purpose
Higher Signal to Noise Design
An elaborated SN ratio enhancement was pursued in MaxMet’s isolation design. Intensive analyses of the ultrasonic transducers and signal processing enabled this novel next generation ultrasonic flow meter.
Wide Range of Interface choices
Ranging from Serial RS-232/485, 0-5V, pulse, 4-20 mA, EN1434 M-BUS and many others, MaxMet’s products are made to your special needs for best results.
Tele-measurement and tele-monitoring is possible through World Wide Web
Customers can monitor and measure the actual up-to-date process status through the local specific LAN or World Wide Web. MaxMet supports any construction of tele-measurement or tele-calibration sites using MaxMet Ultrasonic Gas Flow Meter as well as MaxMet Instrumental Smart Network Interface (ISNI) modules. Now our process managers can watch and even control everything wherever from your monitor.
Tailor Made Precision Instruments to suit you needs
MaxMet Ultrasonic Gas Meters, MaxMet USFM-2000, series can be tailor made upon our customers request. All our products are made to the exact requirements of our customers, providing you with the best solutions!
|
|
Applications
- Natural gas flow measurement
- Precision gas flow control and measurement
- Custody transfer of energy gas
- Ethane, helium, nitrogen and others flow measurement
- Combustion process
- Coal gasification and liquefaction process control
- Off-shore natural gas and petroleum mines
- Domestic low cost ultrasonic gas meters(smaller models for gas billling)
We are ready to offer the top quality instrumentation service to our customers. You can trust MaxMet.
MaxMet Product Service Team - MaxMet Research Institute
Further enquiry
- Product Enquiry : Product Sales Team.
-Technical Enquiry : MaxMet Research Institute
- International Business & Joint venture : Louisa T. C. Kim, VP
Otherwise please use our Products Enquiry Form.
|
|
MaxMet Inc is a leading Korean manufacturer of the process measuring instruments & control devices.
Since the foundation in 2000, MaxMet Inc is continuously developing, renewing, upgrading the design and the performance of the
international standard class process instruements, such as digital viscometers, ultrasonic on-line process viscometers, electro-magnetic
flow meters, ultrasonic gas meters (custody transfer, domestic), ultrasonic current profilers, ultrasonic depth meters, range sonar systems,
ultrasonic Doppler velocimeters, ultrasonic liquid flow meters as well as the world leading ubiquitous smart network interface modules.
MaxMet Inc becomes the leading supplier of process measurement & control devices in Korea as well as the other part of Asia
|
|
